|
|
IRLP Node Order Page
|
|
IRLP - Keeping the Radio in Amateur Radio |
All IRLP nodes consist of a computer, an interface board, and a radio. This page will allow you to purchase either a complete assembled system, or components so you can build your own. Prices are all shown in US Dollars, and you can choose your currency of payment when paying through PayPal if you wish. As you click on items to buy, they will be added to a shopping cart. Combine multiple items in one order to save on shipping.
Please follow the headings below to choose a complete system or system components you require.
IRLP has a two styles of complete systems to choose from:
Starting at $349.99 |
Embedded Node COVID19 - Currently unable to obtain parts - NOT AVAILABLE Starting at $689.99 |
|
|
If you want to build your own Raspberry Pi-based system, choose components from below. Some modifications may be required to your Pi, Pi2, Pi3, or Pi4 board. Components will work with all versions of the Raspberry Pi. Click on the pictures for more information about each component.
w/ attached USB Sound |
||
|
|
|
(MicroSD) Card |
(PiRLP4) |
|
|
|
|
Since inception, IRLP has traditionally run on PC based hardware. The most reliable and robust systems still run on PC based hardware, including the highly reliable embedded IRLP nodes. Below you can order the IRLP interface board and associated cables to build your node using a surplus PC computer. All boards come fully assembled and tested. Please note, that a PC-based parallel port is required to use an IRLP board on a PC.
IRLP now ships with the Debian Linux operating system. The IRLP CD is NOT a full Debian CD. The version we provide is very small image. If you already have Linux, we still suggest you obtain the IRLP CD for optimal performance. IRLP will not assist in the initial installation of any Linux release besides Debian, although many others have been set up to work with IRLP.
 |
Each PC-based IRLP board kit comes complete with all the cables between the board and computer
parallel port (with full-length D-sub brackets) and terminates in a MALE DB-9 connector for interface into the radio. You
will require a FEMALE DB-9 to interface your radio/repeater/controller and TWO mono or stereo 1/8" audio jacks to
connect to your sound card. The audio circuitry (since it is specific to your computer and radio) is your responsibility.
|
IRLP Donations are used to help offset the cost of the many network services, telephone calls, software products, and computer hardware required to run the IRLP on a daily basis. Without your support, IRLP would not be able to troubleshoot problems and add features to IRLP.
The only accepted form of payment accepted online is PayPal. To use PayPal, you do not require a PayPal account. You can use any major credit card to make the purchase. If you are unable to use PayPal, please contact sales@irlp.net to arrange another method of payment.
Any brokerage fees, duties, or local taxes that may apply in your country are your responsibility.
Orders of more than 5 units may be subject to discounts. Please email sales@irlp.net for a quote.
GST or HST applies to all Canadian orders per the provincial rate. All other orders are tax free.
All small packages (including PiRLP and other small components) are shipped by standard Air Post. This service does not include tracking information. Other methods (such as courier) can be arranged, but must be agreed upon before order, as they will affect the total cost. NG-embedded nodes ship by expedited parcel, and have a tracking number. The average turnaround between order and delivery is 1-2 weeks on average. The PC-based boards/cables are all pre-built and ship quickly. Assembled systems add about 1 week to delivery times.
If you have any other questions or concerns, please send an email to sales@irlp.net.
Thank you.
David Cameron VE7LTD
IRLP Designer
|
Enjoy IRLP and please "Pass the Word" If left menu bar is not visible, click here |
||
|
last
updated
August 19, 2019 |
||
